Bilan HVAC Simple|商業線上App不用買

Application designed to assist the Engineer on site and in the office.

Soon version with imperial units (version 2.40 - ca 05.15.2015).

Very useful also to students of Environmental Engineering :)

SIMPLE version is intended only for private use - NON-COMMERCIAL !!!

COMMERCIAL version available at Bilan HVAC for Tablets

Version for mobile available at Bilan HVAC Simple

NOTE:

The application can run on older configurations to several seconds !!! Please calmly wait!

Differences between the SIMPLE and the standard version at the bottom of the page.

DEUTSCHE - Wenn Sie bei der Übersetzung die App und die Website ins Deutsche möchten, emailen Sie mich bitte.

FRANÇAIS - Si vous voulez aider à traduire l'application et le site en français, se il vous plaît écrivez-moi.

Basic features:

Tab VENTILATION

Tab STREAMS

For a given dimension of the flow channel selection depending on the speed or noise

The term for this channel:

- Air flow resistance,

- Speed,

- Noise,

- Selection of the size of the channel so as not to exceed the speed condition - only Standard,

- Selection of the size of the channel so as not to exceed the noise condition - only Standard,

Tab CHANGE OF CONTROL - only the PRO

The full calculation of the change of ventilation, endearing:

- The power of the heater,

- The power of the radiator overt,

- Latent cooling power,

- Moisture condensation,

- The required power-heater.

Tab INSULATION - only the PRO

Determination of heat loss and temperature drop in the channel

Tab SMART - only Standard

Hydraulics calculations carried out in a simplified way, giving the minimum amount of data, and at the same result obtained in the form of a rapid use of the site. In the future there will appear other conversion.

HEATING (from v.2.20)

Tab HYDRAULICS

Conversion under a stream of liquid to various media.

Calculate pipe diameters based on the criterion of speed or pressure.

Tab KVS

Calculate kvs of regulating valve on the basis of the authority or the required resistance.

Tab INSULATION - only Standard

Calculate the heat loss through the insulation.

Tab WATER

In future. From version 3.0.

Tab CONVERIONS

Tab ACOUSTICS - only the PRO

The conversion of acoustic noise dB per dB (A) and NR curves.

Tab UNITS

Exchange units:

- length,

- mass,

- flow,

- pressure,

- energy.

In SIMPLE - only number "1", with 2 decimal place

In addition, version Standard with respect to Simple is characterized by:

- The possibility to use commercial

- The lack of an Internet connection,

- Remembering user settings

- Automatic change of scale for ANY application after starting,

- The lack of advertising (from v. 1.80),

VENTILATION

- The choice duct size as not to exceed the speed condition,

- The choice duct size as not to exceed the noise condition,

- Smart tab,

HEATING

- Selecting any of the pipe.

- Pipe material - in addition:

* HDPE SDR 17

* PERT-Alu-PERT

* PEX

* Crimp systems (steel / stainless steel / copper)

* Stainless high

- Change roughness.

- Additional Factors - glycols,

- Calculation of pipe insulation.

CONVERSION

- Translating for any input,

- Conversion of any number to the nearest 6th decimal place.

Version Pro with respect to Standard is characterized by:

VENTILATION

- Transformation IX central.

- Calculation of the duct insulation.

- Calculations and acoustic conversion.

HEATING

- Any agent.

- Any diameter.

- Additional Factors - thermal oils.

If you want to translate the program into your own language - write to me. The PRO version for free!

免費玩Bilan HVAC Simple APP玩免費

免費玩Bilan HVAC Simple App

Bilan HVAC Simple APP LOGO

Bilan HVAC Simple APP QRCode