Traction Monitor-S(+Recording)|運動線上App不用買-HotApp4Game

Fixing on you motorcycle or car, this monitor shows real time traction G force + lean angle using the built in sensors. In case, gyroscope sensor is no available on your device, (normally mounted on only higher grade model), the monitor show only side G force.

During acceleration, braking or cornering, measures and indicate the side G force. When detects an exceed force, more than the preset value, shows you alarm changing the screen color from green to red.

In case your device able to show lean angle, convert the force as a tire grip force (traction) considering centrifugal force.

< Instruction >

Please refer to the description of traction monitor free version about basic instruction.

< Additional Features in "-S" version>

- Record and Play function

By pressing the Rec button, you can record monitoring data (up to 15 minutes), and show it again on the monitor after riding.

-Fr/Rr Load Distribution

Considering inputted dimensions of the chassis, apply additional load during the braking or acceleration to the Fr or Rr, indicates a maximum side force that gripping either Fr / Rr tire. (maximum value of Fr or Rr tire.)

-Tire Size (width) Input

The difference between the Fr / Rr tire size (width), affects the grip limit during acceleration. Adjusting the input values (tire width), you can adjust the alarm value.

In the case of Rr/Fr width rate = 1.5, it consider that the Rr tire grip limit [on acceleration] is 1.5 times of Fr [on braking].　Red color alarm will be indicated considering this factor.

-Speed Indicate

Using GPS, indicates real velocity. (km/h)

-Sensor Sensitivity fine adjustment

Even with a properly calibration, if there is a difference in indicated values depending on the direction, it is possible to perform fine tune the gravity sensor.

Along the message, moving your device up, down, left, and right, it can be calibrated automatically.

- Bumps on the load may affect the monitoring value, as the monitor use accelerometer and gyroscope sensors.

- The device should be used same as general Navigator or GPS. Don't attempt to change settings while driving . Also, don't stare at the screen while driving.