Structural Engineering Tablet|書籍線上App不用買

Structural Engineering Calculator contains 90 Calculators and Converters, that can quickly and easily calculate and convert different Structural and Civil Engineering parameters. Automatic & Accurate Calculations and Conversions with every Unit and Value Changes. Available in Imperial and Metric Units.

*** Available in Metric and Imperial Units ***

Structural Engineering Calculator contains following 58 Calculators:

• Shear Capacity of Flexural Members

• Critical Ratio

• Effective Length Factor

• Slenderness Ratio

• Allowable Compressive Stress of Building Columns (Slenderness Ratio < Critical Ratio)

• Allowable Compressive Stress of Building Columns (Slenderness Ratio > Critical Ratio)

• Safety Factor

• Maximum Load - Axially Loaded Members

• Allowable Bending Stress (Compact Members)

• Allowable Bending Stress (Noncompact Members)

• Moment Gradient Factor

• Allowable Stress - Compression Flange

• Plastic Moment

• Maximum Unbraced Length for Plastic Design (I-shaped Beams)

• Maximum Unbraced Length for Plastic Design (Solid Rectangular Bars and Symmetrical Box Beams)

• Laterally Unbraced Length - Full Plastic Bending Capacity (I Shapes and Channels)

• Laterally Unbraced Length - Full Plastic Bending Capacity (Solid Rectangular Bars and Box Beams)

• Laterally Unbraced Length - Full Plastic Bending Capacity (Solid Rectangular Bars bent about major axis)

• Limiting Buckling Moment

• Nominal Moment (Compact Beams)

• Critical Elastic Moment - Compact Beams

• Critical Elastic Moment - Solid Rectangular Bars and Symmetrical Box

• Allowable Shear Stress

• Allowable Shear Stress with Tension Field Action

• Area required by the Bearing Plate (Plate Covering the Full Area of Concrete Support)

• Area required by the Bearing Plate (Plate Covering less than the Full Area of Concrete Support)

• Minimum Plate Thickness

• Area required for a Base Plate under a Column supported by a Concrete

• Plate Length

• Thickness of Plate (Cantilever Bending)

• Flange Thickness (H-shaped Column)

• Web Thickness (H-shaped Column)

• Actual Bearing Pressure under the Plate

• Allowable Bearing Stress (Rollers/Rockers)

• Web Depth/Thickness Ratio (Unstiffened Web)

• Web Depth/Thickness Ratio (Transverse Stiffeners)

• Deflection at the Top (Wall with Solid Rectangular Cross Section)

• Deflection at the Top (Shear Wall with a Concentrated Load at the top)

• Deflection at the Top (Fixed Wall against rotation at the top)

• Combined Axial Compression (Ratio of Computed Axial Stress to Allowable Axial Stress > 0.15)

• Combined Axial Compression (Ratio of Computed Axial Stress to Allowable Axial Stress <= 0.15)

• Axial Stress for a Concentrated Load (Applied at a distance larger than depth of the beam from the end of the beam)

• Axial Stress for a Concentrated Load (Applied close to the beam end)

• Concentrated Load of Reaction (Applied at a distance from the beam end of atleast half the depth of beam)

• Concentrated Load of Reaction (Applied closer than half the depth of beam)

• Relative Slenderness of Web and Flange

• Total Column Load (Relative Slenderness of Web and Flange < 2.3)

• Total Column Load (Relative Slenderness of Web and Flange < 1.7)

• Combined Cross-sectional Area of a pair of Column-Web Stiffeners

• Column-Web Depth clear of Fillets

• Thickness of Column Flange

• Allowable Bearing Stress on Projected Area of Fasteners

• Maximum Unit Stress in Steel

• Maximum Stress in the Bottom Flange

• Number of Shear Connectors

• Total Horizontal Shear (Based on Area of Concrete Flange)

• Total Horizontal Shear (Based on Area of Steel Beam)

• Total Horizontal Shear (Based on Area of Longitudinal Reinforcement)

Structural Engineering Calculator also contains 32 Converters related to Structural and Civil Engineering.

Most Comprehensive Structural Engineering Calculator

免費玩Structural Engineering Tablet APP玩免費

免費玩Structural Engineering Tablet App

Structural Engineering Tablet APP LOGO

Structural Engineering Tablet APP QRCode