Infrared Remote LED lamp and lightning control|工具線上App不用買-HotApp4Game

With this sensational App you can equip your home with the innovative LED lighting technology and enabling your friends and family to marvel at it. This gives your living room a new atmosphere and you can use your iPhone to control each individual LED emitters separately and depending on the occasion, mood or season make individual adjustments.NOTE!For the practical application of this app you need an iPhone ™ G3, 3/GS or iPad ™ and the HMB | TEC ® Plug part no. IR LED_IRX. With this IR-plug, you can turn your iPhone / iPad into an infrared transmitter remote control device. Just plug it to the headphone jack and it is ready to operate your led lamps. By using this IR remote control transmitter, you can special RGB-LED lamps, which are equipped with an IR receiver. This LED lights with the brand name LUNAR TEC ™ You can also HMBTEC, they are available for standard sockets of type E14 and E27 (230V AC). So you can replace the LED lamps simply against your old light bulbs and reduce your energy costs thanks to the low power consumption.After one or more LED lights in your house or apartment you've installed convince themselves short of the normal on/off function using the light switch. Plug the IP Plug your iPhone or iPad and turn on the device. Start the App RemoteLED and an info message reminding you to connect the IR adapter. The remote control is then ready for use. An addressing or programming your LED lights is not necessary. Simply point your iPhone with the IR adapter in the direction of the LED lamp, the range is approximately 10 feet, and choose touch of the desired function.The following functions are available:- On and off the LED lamp (it is then always saved the last selected mode in the lamp, so you will be active when you turn on the light switch this setting)- Dimmer with 3 levels- Four-effect programs:- FLASH STROBE and cyclic switching of each color (16)- FADE, SMOOTH: slow and fast color changes in the rainbow colors.To adjust the color of the light you may simply tap on the color slider pad. NOTE:To operate this app you need an infrared adapter and LED lamp with an IR receiver.If your country is different in the voltage of 230Volt/50Hz AC, check for LED lamps with IR control of type LUNAR TEC ™ (available from others at Pearl ®, Amazon ™).For any futher questions please contact our website www.hmb-tec.de or send an email to info@hmb-tec.de