Envisadroid|工具線上App不用買

Control and view your home security system via the Envisalink 3 IP Security Interface Module For DSC systems.

Allows editing of zone names, as well as syncing zone names across multiple devices.

Now also supporting Honeywell (Ademco) and Vista panels.

Instructions :

1)Access the settings menu (Menu->Settings)

2)Select your security panel type (try TPI first, if you cannot connect, select non-TPI)

3)Enter your host name. This is the same as the web address of your Envisalink panel. Do not include any "http://" at the beginning.

4)Port - you can leave this default, it is ignored for non-TPI panels. If your hostname is outside your home network, ensure you have this port opened on your router firewall.

5)Envisalink username - same username/password you are prompted for when you go to the Envisalink module web page

6)As above

7)Alarm passcode - this is your security panel passcode, used to arm/disarm/bypass the system.

8)Autoconnect - if checked the app will connect to your panel everytime you launch it

Once everything is set up, you can connect to your system by Menu -> Connect.

After a few moments, you should see successful login notifications.

If you experience issues, check the log for details (Menu -> Log)

免費玩Envisadroid APP玩免費

免費玩Envisadroid App

Envisadroid APP LOGO

Envisadroid APP QRCode