Bluetooth Reprap|工具線上App不用買

An early development version of the Bluetooth RepRap control app. Interfaces with a Bluetooth serial module that is connected to the RepRap's rx/tx lines.

If you want to use it with an alt serial port, you'll need to use my sprinter fork that has alt serial support. As a bonus, this version of sprinter also supports the high(er) speed file transfer that is built in to the app.

This SHOULD also be compatible with makerbots as long as you're willing to mod the electronics.

Bluetooth module i used: sparkfun.com/products/10269

Custom Sprinter Firmware: github.com/pipakin/Sprinter

Code is available here: github.com/pipakin/Android-Bluetooth-Reprap

Supports:

Axis movement and homing

Temperature control (temperature status NYI)

SD card listing

Printing from SD Card

Pushing files to the RepRap SD card

Printing directly from the android phone

High(er) speed file transfer with custom Sprinter firmware

TODO:

Installation manual for Bluetooth module

Known Issues:

If Bluetooth isn't enabled, it can sometimes cause a force close.

If the Bluetooth signal isn't good enough the app might get stuck on initialization.

If the phone goes to sleep the Bluetooth connection doesn't re-initialize properly (for now the program won't let the phone sleep)

Instructions

1. Get a Bluetooth module

2. Wire it to the rx/tx lines

3. Install the app on your android

4. Pair with the Bluetooth module

5. Run the app and select the appropriate device.

6. Print with only your phone!

免費玩Bluetooth Reprap APP玩免費

免費玩Bluetooth Reprap App

Bluetooth Reprap APP LOGO

Bluetooth Reprap APP QRCode